Tel: 01256 636 454
Superior resistance to all weather conditions, a high level of security and excellent insulation, combine to provide unparalleled versatility with our sectional overhead doors.
Made from insulated steel or aluminium panels, they are able to withstand all the elements and take into account the increasing importance of insulation in building regulations.
Extremely reliable with an industry leading 3 year fully comprehensive warranty, our doors have a wide range of options and configurations from colours and vision panels to activation options and panel designs.
Contact us today to arrange a free site survey or quotation for your new door system.
Phoenix Sectional Overhead Doors are manufactured in accordance with the requirements of the harmonised European Standards BSEN 13241-1:2003
Doors to comply with EN 13241-1 (requirements for safety in use of power operated doors)
The use of quality materials and precise manufacturing controls ensure long service life in normal industrial and commercial applications. All Insulated Door Panels conform to the Building Regulations requirements for Industrial Doors.
Outer and Inner Sheet:
0.5mm hot dipped galvanised steel. Both inner and outer sheets are supplied “V” grooved to provide increased lateral strength, and the whole panel is made-up to form a “T+G” joint top and bottom.
Reinforcing strips are fixed internally to ensure secure fixings for the roller carriers and hinges.
39mm thick rigid polyurethane foam, density 40kg/m3
Low density compressible foam at panel base, and PVC Tape to the panel nose, all factory applied.
Sectional door panels provide high levels of insulation. The foam core between the inner and outer steel sheets of the door panel creates effective interruption of cold bridges, thus preventing transmission of heat or cold.
The outer skin is finished and coloured to match most contemporary building cladding. Please see separate leaflet for range of finishes and colours.
The internal liner skin is finished in RAL 9010 white, polyester coated; stucco embossed galvanised steel as standard. A separate list and sample swatch of the current colour range is available.
It should be noted that when a door is due to be positioned where it is likely to receive direct sunlight then dark colours should be avoided due to the potential of thermal bow.
The 40mm insulated door panel gives sound reduction of (Rw) 25db.
Panel options & accessories
A range of windows in various sizes can be incorporated in the panel, the standard being 600 x 300mm with radiused corners. Each panel is fitted with pre punched galvanised steel end caps and the top and bottom panels are finished with an aluminium retainer which holds the top and bottom EPDM seals.
A range of locking options are available.
Wicket doors are available 800 x 1800mm approx. 150mm above floor level, supplied complete with cylinder type locking
•Individually designed for each door
•Bolted and riveted or spot welded
•Standard lift, high lift, vertical lift and low headroom track configurations. Follow the roof and pitched tracks available.
•Individually designed for each door
•Highest grade springs to DIN 17223 Sort C specification for longer life
•Fully keyed shaft with adjustable coupler
•Spring break device supplied as standard
•Drums, end bearing plates, centre bearing plates, PVC spring fillers (152mm diameter springs only), plugs & winders, securing bolts
•All components galvanised for weather protection
•Doors supplied with adjustable side hinges, intermediate hinges, nylon rollers, cable sets, bottom corner brackets, spring bumpers, self-tapping panel fixings
•Manual doors can be push-up (up to 3000 x 3000mm) or Chain Hoist driven
•Three phase 400v 3 phase operator with emergency hand chain operation in case of power failure, with automatic reset.
•Control: Pre-wired control unit. Impulse control. Opto-sensor self-monitoring safety. A range of safety systems available. Cable break and spring break devices are supplied as standard